Each Axle Kit now comes with RCV Made in the USA 4340 Inner hub gears absolutely FREE.

Now gun drilled with Grease Zerk for Easy Re-Greasing!!

 Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate 30 spline CV Axle set simply replaces your weak Toyota axle shafts with a new high-strength design. The factory axles were designed with 30 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point. This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft.

Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street.

Axle set includes right and left inner axle shafts & 2 pregreased CV joints. Black oxide coating is standard, We can accommodate custom length inner shafts as well if needed.

What makes these axles unique among any other axle set is that the inner race is made from 300M. You can tell that the race is 300M by a slight discoloration from the rest of the birfield. These are the only birfields that have this billet 300M race.

Includes:

Inner Axle Shaft -Long

Inner Axle Shaft -Short

2 - 4340 Chromoly and 300M RCV Birfields

2- Inner Hub Gears, 4340 Chromoly

Birfields come pre-greased. Always use moly based grease for CV Axles and Birfields.

Each Axle Kit now comes with RCV Made in the USA 4340 Inner hub gears absolutely FREE.

Now Gun Drilled for Easy Greasing!

 Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate 30 spline CV Axle set simply replaces your weak Toyota axle shafts with a new high-strength design. The factory axles were designed with 30 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point. This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft.

Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street.

Axle set includes right and left inner axle shafts & 2 pregreased CV joints. Black oxide coating is standard, 

What makes these axles unique among any other axle set is that the inner race is made from 300M. You can tell that the race is 300M by a slight discoloration from the rest of the birfield. These are the only birfields that have this billet 300M race.

Includes:

Inner Axle Shaft -Long

Inner Axle Shaft -Short

2 - 4340 Chromoly and 300M RCV Birfields

2- Inner Hub Gears, 4340 Chromoly

Birfields come pre-greased. Always use moly based grease for CV Axles and Birfields.

Fits: International Versions (NON USA) LJ70, LJ71, LJ73, LJ74, LJ78, RJ70, RJ73, RJ78, KZJ70, KZJ71, KZJ77, 

Longfield™ LJ70/KZJ70 30-Spline 4340 Chromoly Axle & Birfield Kit

The new 30 spline axlekit is a perfect match for your next budget build.  This kit offers anincrease in strength over stock axles (76% Stronger) without breaking the bank.

With larger tires and more horsepower being used on the trails these days, upgrades to your axle are more critical than ever.  In a Toyota, one of the common failures are the stock 27-spline birfields and axles.  The solution to this problem is our Longfield™ 30-Spline 4340 Chromoly Axle and Birfield Kit.  These birfields and axles will get you to wherever you need to go and give you confidence and peace of mind to run any trail.

The Longfield™ birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers.  The Longfield™ birfield housing is made out of forged 4340 chromoly steel. The axle shafts are also made out of 4340 chromoly steel. The internals of our Longfield™ birfields are made out of 4340 chromoly steel and heat-treated for superior strength.

 Application Data

•  Toyota LJ70
•  Toyota KZJ70

 NOTE that these axle shafts have a seal diameter of 33mm, the same as Hilux, FJ40 and FJ60.  Some LJ70 and KZJ70 shafts have a seal diameter of 35mm the same as FJ80.  If this is the case the standard axle seals will not fit.

Longfield™ FJ40/55/70 30-Spline 4340 Chromoly Axle & Birfield Kit  Standard and Long Spline

The new 30 spline axlekit is a perfect match for your next budget build.  This kit offers anincrease in strength over stock axles (76% Stronger) without breaking the bank.

With larger tires and more horsepower being used on the trails these days, upgrades to your axle are more critical than ever.  In a Toyota, one of the common failures are the stock 27-spline birfields and axles.  The solution to this problem is our Longfield™ 30-Spline 4340 Chromoly Axle and Birfield Kit.  These birfields and axles will get you to wherever you need to go and give you confidence and peace of mind to run any trail.

The Longfield™ birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers.  The Longfield™ birfield housing is made out of forged 4340 chromoly steel. The axle shafts are also made out of 4340 chromoly steel. The internals of our Longfield™ birfields are made out of 4340 chromoly steel and heat-treated for superior strength.

 Application Data

•  Toyota FJ40
•  Toyota FJ55
•  Toyota FJ70

 There are 2 versions,  

• Standard Spline  TAX-LF30FJ40   (303404-1-KIT)
•  Long Spline.  TAX-LF30FJ40-LS  (303405-1-KIT)

The Long Spline axle shafts have an extended spline for Land Cruiser locker applications. The spline length on the diff side is 4.75" Long.

Longfield™ FJ60 30-Spline 4340 Chromoly Axle & Birfield Kit  Standard and Long Spline

The new 30 spline axlekit is a perfect match for your next budget build.  This kit offers anincrease in strength over stock axles (76% Stronger) without breaking the bank.

With larger tires and more horsepower being used on the trails these days, upgrades to your axle are more critical than ever.  In a Toyota, one of the common failures are the stock 27-spline birfields and axles.  The solution to this problem is our Longfield™ 30-Spline 4340 Chromoly Axle and Birfield Kit.  These birfields and axles will get you to wherever you need to go and give you confidence and peace of mind to run any trail.

The Longfield™ birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers.  The Longfield™ birfield housing is made out of forged 4340 chromoly steel. The axle shafts are also made out of 4340 chromoly steel. The internals of our Longfield™ birfields are made out of 4340 chromoly steel and heat-treated for superior strength.

 Application Data

• 1980-1990 Toyota FJ60

 There are 2 versions,  

• Standard Spline  TAX-LF30FJ60   (303404-1-KIT)
•  Long Spline.  TAX-LF30FJ60-LS  (303405-1-KIT)

The Long Spline axle shafts have an extended spline for Land Cruiser locker applications. The spline length on the diff side is 4.75" Long.

Longfield FJ80 Gun Drilled 30-Spline 4340 Chromoly Super Set

The Longfield™ FJ80 Gun Drilled 30-Spline Birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of the birfield are also made from 4340 chromoly and are dual heat treated for superior strength. The birfield has a M8 grease zerk at the end of the stub shaft and is gun drilled through the center of the birfield to allow for grease to pass through the zerk fitting and into the internals. This will save you precious time by eliminating the need to disassemble your axle just to service your birfields.

The FJ80 Gun Drilled 30-Spline Birfields also have a shallow relief near the splines on the stub shaft known as a Machined Spline Saver. The Machined Spline Saver eliminates stress concentrations caused by grooving from the tool that makes the splines on the stub shaft. The stress concentration from the spline groove is a common failure point on birfield stub shafts. The stub shaft of the Birfield has dual snap ring grooves to accommodate FJ80s with short and long drive flanges.

The axle shafts are also made out of 4340 chromoly steel.

Included in this kit is a set of new FJ80 ABS Tone Rings. This will allow you to install the Longfield™ FJ80 Gun Drilled 30-Spline Super Set on both ABS and Non-ABS FJ80 applications. No other kit on the market can compare.

Note: Included is the FJ80 Extended Dust Caps for 1990-1993 models that use short drive flanges.

Specifications

• Made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers
• Birfield housing is made out of forged 4340 chromoly steel
• Internals of our Longfield™ birfields are made out of 4340 chromoly steel and then dual heat-treated for superior strength
• Machined spline saver to eliminate stress concentrations from the spline groove
• Gun drilled to create grease passage through the birfield
• M8 grease zerk at the end of stub shaft for easy greasing of the birfield
• The axle shafts are also made out of 4340 chromoly steel

Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate CV Axle set simply replaces your weak Nissan Patrol Y60's axle shafts with a new high-strength design. The factory axles were designed with 31 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point. This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft. Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street. 

Axle set includes right and left inner axle shafts & 2 pregreased CV joints.

Trail-Gear is now manufacturing a much needed OEM replacement component, and filled another need in the Toyota off roading industry. These are new bearing spindles for 1979-1985 Toyota Pickups and 4Runners (Hilux).

These spindles are manufactured from forged 4140 chromoly and then CNC machined for a perfect fit. Sold individually, these spindles are great when building or rebuilding a Rock Assault Housing, a Diamond Axle,an OEM axle, and Ruffstuff Specialties housings.

This is the seal that seals the front wheel bearings in the hubs against the spindle. This is not the inner axle seal. This is a seal that needs to be replaced anytime you remove your wheel bearings.

This is not a cheap seal as found in many knuckle rebuild kits, this is a high quality full steel encased, dual lip replacement.

These are sold individually.

Order qty. 2 for 1 Vehicle.

Fits:

1979-1995 Toyota Hilux Pickup Solid Axle

1976-1997 Landcruiser ????

Also you need these if you are putting IFS hubs onto a Solid Axle

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width the wider rear axle found on 86 and up Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Grade 8 Studs, Grade 10.9 nuts. Five sizes available. Shipped as a set of 2 spacers w/nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pickups, 4Runners, FJ-40, FJ-60 & FJ80

This is for a PAIR of spacers

True Trac limited slip for Toyota 8" V6 Differential. 

The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing extremely smooth operation. Since there are no clutches in this unit, there are no parts to wear out and no need to run limited slip additive in your oil. 

Fits:

1988-1995 Toyota V6 Rear Differential

WILL NOT WORK ON FJ80 FRONT

Details

NOTE that these are second hand, they were working prior to being removed.

Please contact me to discuss and for a price.

While most V6 trucks came with 1" master cylinders, 1979-1995 4 cylinder Toyota Pickups and 4Runners got left with a 7/8" cylinder.

TB-MC-HILUX   Stock Cylinder Found on V6 Equipped Pickups

V6 Master Cylinders are a direct replacement for your 4CYL variant. With larger drums, or with larger calipers, you may be finding that the pedal wants to go all the way to the floor.   

This master cylinder may need slight readjustment of the brake lines.  It is good to note that the front hole is for the front brakes and the hole closest to the booster is for the rear brakes.

Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate CV Axle set simply replaces your weak Nissan Patrol Y61's axle shafts with a new high-strength design. The factory axles were designed with 31 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point. This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft. Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street. 

Axle set includes right and left inner axle shafts & 2 pregreased CV joints.