Filters

VEHICLE

Toyota Pinion Flange Fit Kit For use when upgrading to 29 spline pinion Sold out

Toyota Pinion Flange Fit Kit For use when upgrading to 29 spline pinion

$100.00
Toyota Pinion Flange Fit Kit For use when upgrading to 29 spline pinion

Toyota Pinion Flange Fit Kit For use when upgrading to 29 spline pinion

by Nitro Gear
Sold out
$100.00

Toyota Pinion Flange Fit Kit Use When Upgrading to 29 Spline Pinion by Nitro (YOKTOYFITKIT-29)

Replaces Toyota OE Part number 41204-35100 & 41204-35110.

Required to fit Nitro 29 Spline 8” or 9.5” Ring & Pinions to 2002 & older vehicles.


In 2002, Toyota started using 29 Spline pinion & flange on the 8” & 9.5” differentials. Following Toyota's lead for an upgrade, Nitro Gear & Axle has been upgrading much of their line of Ring & Pinions for Toyota to 29 Spline. This means, if you are fitting the newer 29 Spline Ring & pinion to a 2002 or Older diff, you will need this flange.

Differential: Toyota 8" & 9.5"
Pinion Spline Count: 29
Bolt Patterns: 60mm x 60mm, 66mm x 66mm
Seal Surface: 1.615"/41mm
Kit Includes:
  • Dual Drilled Pinion Flange
  • Pinion Nut
  • Pinion Seal
Toyota Differential Solid Pinion Spacer

Toyota Differential Solid Pinion Spacer

$40.00
Toyota Differential Solid Pinion Spacer

Toyota Differential Solid Pinion Spacer

by 4wdstuff
$40.00

Only for Toyota 8" diffs

Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota (solid axle) applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer to set up but you won't have to keep retorque the pinion nut down the road.

There are 2 sizes  

  • 4 Cylinder
  • V6 / High Pinion

 Note: Not designed for IFS vehicles

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears NITRO

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears NITRO

$450.00
Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears NITRO

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears NITRO

by Nitro Gear
$450.00

29 Spline

Nitro Ring & pinions are made from the highest quality forgings using state-of-the-art CNC machining processes. Strict tolerences ensure precision fitment and hassle free installation. Computer controlled lapping processes result in an excellent contact pattern and a quiet running setup that will last.

Each new application is test fitted by real differential experts and put through stringent review process prior to being released. Nitro is hard at work developing new products that you demand.

Toyota Differential Setup Installation Bearing Kits

from $300.00

Toyota Differential Setup Installation Bearing Kits

by Various
$325.00

These Toyota Differential Setup Installation Bearing Kits include what you need to make your gear setup a breeze. Kit includes high quality bearings from manufacturers such as Koyo and Timken, crush sleeve, gear marking paint & brush, shims, and pinion seal.

8"  V6 and High Pinion

8"  4 Cylinder

9.5" Landcruiser

Toyota 8" V6 29 Spline Ring and Pinion NITRO

Toyota 8" V6 29 Spline Ring and Pinion NITRO

$450.00
Toyota 8" V6 29 Spline Ring and Pinion NITRO

Toyota 8" V6 29 Spline Ring and Pinion NITRO

by Nitro Gear
$450.00

High performance Nitro Ring & Pinion gear set for Toyota V6 in a 29 Spline

Nitro Ring & pinions are made from the highest quality forgings using state-of-the-art CNC machining processes. Strict tolerences ensure precision fitment and hassle free installation. Computer controlled lapping processes result in an excellent contact pattern and a quiet running setup that will last.

Each new application is test fitted by real differential experts and put through stringent review process prior to being released. Nitro is hard at work developing new products that you demand.  Models w/ factory 3.07 & 4.88's have a different offset and will need a new dropout when changing ratio.

NOTE

 The spline on the Pinion for the flange is 29 Spline, if you have a 27 spline flange you will also need to purchase a 29 Spline Flange with Nut and Seal

Toyota 8" 27 Spline Ring and Pinion YUKON

Toyota 8" 27 Spline Ring and Pinion YUKON

$375.00
Toyota 8" 27 Spline Ring and Pinion YUKON

Toyota 8" 27 Spline Ring and Pinion YUKON

by Yukon
$375.00

High performance Yukon Ring & Pinion gear set for Toyota V6 in various ratios  27 Spline

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up.  Models w/ factory 3.07 & 4.88's have a different offset and will need a new dropout when changing ratio.

Toyota Pinion Flange Nut

Toyota Pinion Flange Nut

$10.00
Toyota Pinion Flange Nut

Toyota Pinion Flange Nut

by LowRange
$10.00

There are 2 sizes of pinion flange nuts, 27 spline and the larger 29 spline

If you have a 2001 and Older Toyota Pickup then most likely your pinion flange is going to be 27 Spline unless it has been upgraded.   The easiest way to verify this is to count the splines on the pinion gear. If you want to run the new 29 Spline Ring and Pinions, you will need a new 29 Spline Pinion Flange, Seal and Nut. This is just the NUT, seal and flange are available elsewhere.

Differential: Toyota 8" & 9.5"

 

Toyota Differential Pinion Seal For 27 and 29 Spline Flanges

Toyota Differential Pinion Seal For 27 and 29 Spline Flanges

$10.00
Toyota Differential Pinion Seal For 27 and 29 Spline Flanges

Toyota Differential Pinion Seal For 27 and 29 Spline Flanges

by LowRange
$10.00

This is a replacement pinion seal.  This is a much better seal than the seals you find at your local parts store because usually they don't have the special dust shield lip.  These are really no different than a heavy duty seal other than they do not have an indexing lip for installation.  We usually coat the outside of these seals with a little RTV and then press them in.

Features:

-Special Lip for dust sealing- Just Like OEM.

There are sizes    29 Spline   and 27 Spline

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears TRAIL CREEPER Sold out

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears TRAIL CREEPER

$350.00
Toyota Triple Drilled Pinion 27 Spline Flange for Early and Late Patterns

Toyota Triple Drilled Pinion 27 Spline Flange for Early and Late Patterns

$60.00
Toyota Triple Drilled Pinion 27 Spline Flange for Early and Late Patterns

Toyota Triple Drilled Pinion 27 Spline Flange for Early and Late Patterns

by LowRange
$60.00

Low Range Off Road is proud to give you options when it comes to drive line flanges. This one in particular is one of the only flanges that will work with early 1979-1983 small 8mm bolt pattern drive shafts. This fits the pinion side only and will fit stock ring and pinions and aftermarket ring and pinions with 27 splines.

Patterns Available:

56mm X 64mm Early 1979-1983 Toyota Hilux Pickup U-Joint (NON CV)
60mm X 60mm Late 1984-1995 Toyota Pickup and 4Runner U-Joint (NON CV)
66mm X 66mm 1995-2004 Toyota Tacoma, 1996-2002 4Runner, Toyota Tundra 2WD UJoint (NON CV) only with 27 spline.

Toyota 8" V6 29 Spline Ring and Pinion SILVERBACK

Toyota 8" V6 29 Spline Ring and Pinion SILVERBACK

$350.00
Toyota 8" V6 29 Spline Ring and Pinion SILVERBACK

Toyota 8" V6 29 Spline Ring and Pinion SILVERBACK

by LowRange
$350.00

High performance Silverback Ring & Pinion gear set for Toyota V6  29 Spline

Silverback Gears are the highest quality ring and pinions available for Toyota and Suzuki Vehicles.  These are made from heat treated 8620 Alloy on USA Gleason Machines. Gleason is the widest known hypoid gear cutting machines on the planet.  Low Range Off Road will not settle for cheap gears. These ring and pinions are known for their quiet running and high strength. They have been beaten, tested and proven on the road daily and off road in the toughest trails across the world.  They are consistent in set-up and have the most consistent wear patterns out of any aftermarket Toyota gear available.  We don't want to be stranded off road using an inferior ring and pinion, why should you? Models w/ factory 3.07 & 4.88's have a different offset and will need a new dropout when changing ratio.

NOTE

 The spline on the Pinion for the flange is 29 Spline, if you have a 27 spline flange you will also need to purchase a 29 Spline Flange with Nut and Seal

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears YUKON Sold out

Toyota 8" Reverse Cut High Pinion Ring And Pinion Gears YUKON

$400.00