Toyota Pinion Flange Fit Kit Use When Upgrading to 29 Spline Pinion by Nitro (YOKTOYFITKIT-29)

Replaces Toyota OE Part number 41204-35100 & 41204-35110.

Required to fit Nitro 29 Spline 8” or 9.5” Ring & Pinions to 2002 & older vehicles.


In 2002, Toyota started using 29 Spline pinion & flange on the 8” & 9.5” differentials. Following Toyota's lead for an upgrade, Nitro Gear & Axle has been upgrading much of their line of Ring & Pinions for Toyota to 29 Spline. This means, if you are fitting the newer 29 Spline Ring & pinion to a 2002 or Older diff, you will need this flange.

Differential: Toyota 8" & 9.5"
Pinion Spline Count: 29
Bolt Patterns: 60mm x 60mm, 66mm x 66mm
Seal Surface: 1.615"/41mm
Kit Includes:
  • Dual Drilled Pinion Flange
  • Pinion Nut
  • Pinion Seal

29 Spline

Nitro Ring & pinions are made from the highest quality forgings using state-of-the-art CNC machining processes. Strict tolerences ensure precision fitment and hassle free installation. Computer controlled lapping processes result in an excellent contact pattern and a quiet running setup that will last.

Each new application is test fitted by real differential experts and put through stringent review process prior to being released. Nitro is hard at work developing new products that you demand.

Toyota 8" V6 29 Spline Ring and Pinion NITRO

High performance Nitro Ring & Pinion gear set for Toyota V6 in a 29 Spline

Nitro Ring & pinions are made from the highest quality forgings using state-of-the-art CNC machining processes. Strict tolerences ensure precision fitment and hassle free installation. Computer controlled lapping processes result in an excellent contact pattern and a quiet running setup that will last.

Each new application is test fitted by real differential experts and put through stringent review process prior to being released. Nitro is hard at work developing new products that you demand.  Models w/ factory 3.07 & 4.88's have a different offset and will need a new dropout when changing ratio.

NOTE

 The spline on the Pinion for the flange is 29 Spline, if you have a 27 spline flange you will also need to purchase a 29 Spline Flange with Nut and Seal

 

Nitro Ring & pinions are made from the highest quality forgings using state-of-the-art CNC machining processes. Strict tolerences ensure precision fitment and hassle free installation. Computer controlled lapping processes result in an excellent contact pattern and a quiet running setup that will last.

Will Fit the Following Models:

  • 1969-1983 FJ40 front or rear
  • FJ45 front or rear
  • 1968-1979 FJ55 front or rear
  • 1981-1987 FJ60 front or rear
  • HJ60 front or rear
  • 1988-1990 FJ62 front or rear
  • BJ70 Leaf Srung Only (not coil sprung)
     
  • 1990-1992 Landcruiser FJ80 Rear
  • 1993-1997 Landcruiser FZJ80 Rear
  • 1990-1997 Landcruiser HDJ80 Rear
  • 1990-1997 Landcruiser HZJ80 Rear

Includes 1 Ring and Pinion Gear Set for one differential.

 

Details

For many years Nissan Patrols have been well known for their strength & reliability all over the world. Out of the box they feature some stout drivetrain. When lifted and running oversized tires many have found performance and economy to suffer. The best remedy is to change the gear ratio in your differentials. The problem is OEM Ring & Pinions are difficult to source in low ratios, and very expensive. Since Nissan Patrols are not offered in the USA, none of the primary Gear suppliers have offered anything aftermarket, until now. Nitro Gear & Axles has addressed this by offering Ring & Pinions for the robust H233b rear and the H233b front Reverse cut diff. Nitro Gear has quickly become the #1 choice for aftermarket gear ratios around the globe, and makes an effort to cater to demands of consumers whether in the USA or otherwise.

Ratios   4.63       5.13

Vehicle Applications:  
  • 1987-1998 Nissan Patrol GQ Y60 (Front)
  • 1998-2009 Nissan Patrol GU Y61 (Front)
  • 1987-1998 Nissan Safari (Front)
  • 1988-1994 Ford Maverick (Front)
Nissan Rear H233B  Ring & Pinion,  Nitro Gear

Details

For many years Nissan Patrols have been well known for their strength & reliability all over the world. Out of the box they feature some stout drivetrain. When lifted and running oversized tires many have found performance and economy to suffer. The best remedy is to change the gear ratio in your differentials. The problem is OEM Ring & Pinions are difficult to source in low ratios, and very expensive. Since Nissan Patrols are not offered in the USA, none of the primary Gear suppliers have offered anything aftermarket, until now. Nitro Gear & Axles has addressed this by offering Ring & Pinions for the robust H233b rear and the H233b front Reverse cut diff. Nitro Gear has quickly become the #1 choice for aftermarket gear ratios around the globe, and makes an effort to cater to demands of consumers whether in the USA or otherwise.

Ratios   4.63       5.13

Vehicle Applications:
  • 2000-2004 Nissan Xterra 6 cyl (Rear)
  • 1998-2004 Nissan Frontier 6 cyl (Rear)
  • 1998-2004 Nissan Navarra 6 cyl (Rear)
  • 1996-2004 Nissan Pathfinder 6 cyl (Rear)
  • 1987-1998 Nissan Patrol GQ Y60 (Rear)
  • 1987-1998 Nissan Safari (Rear)
  • 1988-1994 Ford Maverick (Rear)
  • 1998-2009 Nissan Patrol GU Y61 (Rear)
  • 2003-2006 Nissan Terrano II (Rear)
  • 2003-2006 Nissan Mistral (Rear)
  • 2003-2006 Ford Maverick (Rear)